Professional hedge and verge mower
MARTINA EVO is a professional hedge cutter for agricultural use, suitable for cutting grass and shrubs in banks and ditches adjacent to plots of land. It can be coupled with tractors with a power between 60 and 80 HP with minimum wheel track of 2 m and a weight of 2.500 Kg, allowing a maximum extension of 6,4 m in total safety.
It is essential to have a high-strength robust arm to ensure maximum performance and reliability over time. The safety systems include OVER CENTER on the first arm which prevents it from suddenly lowering, the hydraulic safety system with adjustable hydropneumatic shock-absorber, the manual closure of the hydraulic circuit for safe maintenance operations. Furthermore, the mechanical safety shock proof system discharges the hydraulic pressure of the rotor in case it blocks.
The CFS (Contour Following System) is available on request, which ensures the floating of the arm by means of a nitrogen accumulator that makes it possible to follow the profile of the ground without having to intervene on the controls, protecting the arm and the hydraulic motor from damage.
MARTINA EVO can be coupled with different types of belt or direct drive heads from 100 to 120 cm wide which, depending on the extension versions, offers different combinations for the cutting parts, blades or hammers. The spiral type rotor allows the double rotation direction and the floating function up to 246° of rotation, ensuring maximum performance.
In addition to the classic heads for twigs, hedge bars for cutting shrubs up to 1.5 cm and the attachment for cutting branches up to 10 cm are also available. MARTINA EVO also allows cleaning road side ditches and channels thanks to the ditch cutter. The high efficiency of this equipment comes from the use of a hydraulic motor, an ideal solution for the drive of particular accessories that work with high extensions.
| Measure | Arm extension | Tractor weight (min) | Wheel-track (min) | PTO rpm | Hydraulic oil tank | Power kW (min) | Weight |
|---|---|---|---|---|---|---|---|
| 500 | 18.57 ft | 5,511.5 lb | 7.22 ft | 46.24 gal | 59 kW | 2,028.23 lb | |
| 595 | 20.37 ft | 7,716.1 lb | 7.22 ft | 46.24 gal | 59 kW | 2,094.37 lb | |
| 600T | 21.46 ft | 8,818.4 lb | 7.22 ft | 46.24 gal | 59 kW | 2,050.28 lb |
TRACTOR CONNECTION
3 point hitch cat. II^
TRANSMISSION
PTO shaft
PTO 540 rpm
Independent hydraulic system with cast iron gear pump and motor
Cast iron overdrive category 3
Hydraulic valve system operated by flexible cables and control unit with mechanical levers
FRAME
High strength steel frame
Ground pins in hardened steel
Wear-resistant bushings with lubricating nipple
Hydraulic pipes protected by metal guard and shockproof/splashproof spiral wrapping
Provision for heat exchanger installation in the hood
1st and 2nd points turnbuckle implement jacks
Stationing feet
VERSION 600T: 31.5 in. telescopic extension
SAFETY
Automatic blocking valve and parachute valve for machines with lever and on-off joystick controls
"OVER CENTER" safety system for machines equipped with proportional joystick
Safety hydraulic system with hydropneumatic dampenere and max safety valve on the rotation hinge cylinder
Safety lever to prevent the rotor from reverse spin
Safety valve for unloading in case of rotor blockage
«CE» protections
CUTTING HEAD AGRI PS-PRO
Cutting head angle 212°
Professional rear roller Ø140mm, height adjustable, with 4 tapered roller bearings, mud scraper and interchangeable central body
Double sense rotor rotation
Self-levelling floating system
