UNICO L

Mounted plough with parallelogram adjustment and shear bolt safety system

Designed for in furrow ploughing, UNICO L has multiple working position correction and safety systems to handle the combined tasks of soil aeration, crop residue burial and incorporation. Doing away with welded joints between the frame and plough bodies in favour of bolting ensures strength, reliability and stability even under considerable stress. Available in an up to 5-bodies configuration, it is suitable for tractors with horsepower up to 310 HP.

Download the brochure

UNICO L
UNICO L NSH

No. of bodies

3-5

Frame section

140x140 mm

Power required KW

89-186 kW

Power required HP

119-249 HP

The modular design means a standard frame built to accommodate three or four plough bodies, with the option of attaching an additional body using a bolted-on connection plate (standard issue on extendible versions), meaning coupling can be done in a matter of seconds. The headstock also allows for different types of configuration. The upper hitch point and rotation pin are part of a central housing that is an integral part of the plough, while the lower hitch points feature bolt-on removable flanged fixings, offering a number of advantages: switching quickly from the fixed headstock configuration to an oscillating one or to different category hitches in a matter of seconds and, lastly, being able to change the height of the connection to the lift to accommodate tractors with different wheels sizes.

UNICO L features the "SMOOTH SET" parallelogram system, designed to optimise true line and first body working width adjustment setup times and improve the accuracy of work in the field. This system means that, on the one hand, there is less stress on the frame and headstock and, on the other, the true line and first body width adjustments are not affected by changes to the working width.

Working width can be mechanically adjusted by means of the “STEP-BY-STEP” type, “PASSO” system, which has 5 bolt adjustment options for locking in the most suitable setup in just a few steps. Alternatively, the "VARIO" version features a non-stop hydraulic adjustment system with automatic memory. Working width is changed by means of a hydraulic cylinder by suitably adjusting hydraulic power unit's relevant controls.

In addition to the classic shear bolt system, there is the option of the NSH version with Non-Stop Hydraulic safety system. Hydraulic cylinders for each plough body - with a pre-charge that can be hydraulically adjusted from the cab - enable the plough bodies to be lifted in the event of impact, returning them to the right position as soon as they have cleared the obstacle. Given their position, the first and fourth plough bodies have larger-bore cylinders to withstand a higher load.

Special Contents

"Smooth set" parallelogram frame

Passo mechanical adjustment

Shear bolt mechanical safety system

Interchangeable headstock

Non-stop hydraulic working width adjustment (vario)

NSH active safety system

Technical data - UNICO L

Adjustment system: Passo

Measure	No. of bodies	Bodies working width	Inter-body clearance	Headstock diameter	Under beam clearance STD	Hitch	Power required HP	Power required KW	Weight
3+0	3	30-35-40-45-50 cm	95	120	80	3 point cat. III^	119-150 hp	89-112 kW	1240
3+0	3	33-38-44-50-55 cm	105	120	80	3 point cat. III^	119-150 hp	89-112 kW	1255
3+0	3	36-42-48-54-60 cm	115	120	80	3 point cat. III^	119-150 hp	89-112 kW	1270
4+0	4	30-35-40-45-50 cm	95	130	80	3 point cat. III^	160-200 hp	119-149 kW	1575
4+0	4	33-38-44-50-55 cm	105	130	80	3 point cat. III^	160-200 hp	119-149 kW	1595
4+0	4	36-42-48-54-60 cm	115	130	80	3 point cat. III^	160-200 hp	119-149 kW	1615
5+0	5	30-35-40-45-50 cm	95	130	80	3 point cat. III^	180-249 hp	134-186 kW	1820
5+0	5	33-38-44-50-55 cm	105	130	80	3 point cat. III^	180-249 hp	134-186 kW	1845

Adjustment system: Vario

Measure	No. of bodies	Bodies working width	Inter-body clearance	Headstock diameter	Under beam clearance STD	Hitch	Power required HP	Power required KW	Weight
3+0	3	30-55 cm	95	120	80	3 point cat. III^	119-150 hp	89-112 kW	1335
3+0	3	30-55 cm	105	120	80	3 point cat. III^	119-150 hp	89-112 kW	1350
3+0	3	33-60 cm	115	120	80	3 point cat. III^	119-150 hp	89-112 kW	1365
4+0	4	30-55 cm	95	130	80	3 point cat. III^	160-200 hp	119-149 kW	1690
4+0	4	30-55 cm	105	130	80	3 point cat. III^	160-200 hp	119-149 kW	1735
4+0	4	33-60 cm	115	130	80	3 point cat. III^	160-200 hp	119-149 kW	1730
5+0	5	30-55 cm	95	130	80	3 point cat. III^	180-249 hp	134-186 kW	1950
5+0	5	30-55 cm	105	130	80	3 point cat. III^	180-249 hp	134-186 kW	1975

Standard Equipment - UNICO L

TRACTOR CONNECTION
3 point hitch cat. III^

FRAME
Parallelogram adjustment
Plate for supplementary body
Packer arm flange
Parking stand

ADJUSTMENTS
Working width adjustable mechanically (PASSO) or hydraulically (VARIO)
Frame alignment automatic memory with 1st body mechanic adjustment (for versions starting from 4+0)
Mechanical true line adjustment

SAFETY SYSTEM
Shear bolt safety system

WORKING BODIES
Moldboard MP4WN
Share point on each moldboard
Coulter knife on the last body

Technical data - UNICO L NSH

Adjustment system: Passo

Measure	No. of bodies	Bodies working width	Inter-body clearance	Headstock diameter	Under beam clearance STD	Hitch	Power required HP	Power required KW	Weight
3+0	3	30-35-40-45 cm	95	120	80	3 point cat. III^	119-150 hp	89-112 kW	1405
3+0	3	33-38-44-50 cm	105	120	80	3 point cat. III^	119-150 hp	89-112 kW	1420
4+0	4	30-35-40-45 cm	95	130	80	3 point cat. III^	160-200 hp	119-149 kW	1805
4+0	4	33-38-44-50 cm	105	130	80	3 point cat. III^	160-200 hp	119-149 kW	1825
5+0	5	30-35-40-45 cm	95	130	80	3 point cat. III^	180-249 hp	134-186 kW	2075
5+0	5	33-38-44-50 cm	105	130	80	3 point cat. III^	180-249 hp	134-186 kW	2095

Adjustment system: Vario

Measure	No. of bodies	Bodies working width	Inter-body clearance	Headstock diameter	Under beam clearance STD	Hitch	Power required HP	Power required KW	Weight
3+0	3	30-55 cm	95	120	80	3 point cat. III^	119-150 hp	89-112 kW	1490
3+0	3	30-55 cm	105	120	80	3 point cat. III^	119-150 hp	89-112 kW	1515
4+0	4	30-55 cm	95	130	80	3 point cat. III^	160-200 hp	119-149 kW	1910
4+0	4	30-55 cm	105	130	80	3 point cat. III^	160-200 hp	119-149 kW	1940
5+0	5	30-55 cm	95	130	80	3 point cat. III^	180-249 hp	134-186 kW	2224
5+0	5	30-55 cm	105	130	80	3 point cat. III^	180-249 hp	134-186 kW	2235

Standard Equipment - UNICO L NSH

SAFETY SYSTEM
NON STOP hydraulic safety system
Oversized cylinder bore on 1st and 4th body NON STOP

WORKING BODIES
Moldboard MP4WN
Share point on each moldboard
Coulter knife on the last body